Industrial IoT 5G/4G Wireless Expansion Module for Raspberry Pi CM4, With UPS Module, Onboard M.2 Slot, 4G Module included

Waveshare 24787 - Industrial IoT 5G/4G Wireless Expansion Module Designed For Raspberry Pi Compute Module 4, With UPS Module, Onboard M.2 Slot - SIM7600G-H-M.2 4G Module included - CM4-IO-WIRELESS-BASE-B-Acce-A (EN) This is an industrial expansion module based on Raspberry Pi CM4 with UPS module, which features common interfaces such as Gigabit Ethernet, HDMI, USB, and GPIO, allows additional 4G / 5G wireless communication modules to be connected via the M.2 B KEY socket. There are also industrial interfaces/resources including RS485, CAN, and RTC. Combined with the industrial rail-mount protection case, the module is an ideal choice for building IoT gateway, 4G/5G router, IoT data acquisition, or even the PLC device in industrial automatic control system, and more. Specifications CM4 socket suitable for all variants of Compute Module 4 UPS Power UPS Module, 5V/2.5A (Max) output, supports 3 × 10440 lithium batteries (NOT included) Networking Gigabit Ethernet RJ45 M.2 B KEY, for connecting 5G / 4G wireless module Nano-SIM card slot, supports standard Nano-SIM card for 5G/4G/3G/2G communication USB USB 2.0 × 3 Pin header Non-isolated RS485 × 2, Non-isolated CAN × 1, Partial GPIO pins Camera MIPI CSI-2 × 1 (15pin 1.0mm FPC connector) Video HDMI × 1, supports 4K 30fps output RTC Real-time clock with battery socket and ability to wake Compute Module 4 Storage TF card socket for Compute Module 4 Lite (without eMMC) variants Fan header 5V/12V, allows speed adjustment and measurement Power input 5V or 7~36V Dimensions 145 × 90 × 40mm Includes CM4-IO-WIRELESS-BASE-B x1 Screwdriver x1 4G moduleSIM7600G-H-M.2 x112V 2A power adapter x1PCB antenna (IPEX connector) x1Screws pack x1 SIM7600G-H-M.2 4G Module 4G/3G/2G communication, GNSS positioning, global coverage Standard M.2 B KEY interface, high compatibility Multi-constellation high accuracy positioning GNSS receiver support Suitable for LTE, UMTS, and GSM network with global coverage Abundant software functions: FOTA, LBS, TLS, VoLTE Up to 150Mbps (Max) downlink data rate and 50Mbps (Max) uplink data rate Supports popular OS driver: Windows, Linux, Android etc. AT commands of the SIM7600G-H-M.2 series are compatible with the SIM7500/SIM7600 series modules Rich Interfaces What's On Board CM4 socketsuitable for all variants of Compute Module 4 HDMI connectorsupports 4K 30fps output USB 2.0 ports3x USB 2.0, for connecting sorts of USB devices RJ45 Gigabit Ethernet10/100/1000M compatible DC power supply7 ~ 36V DC input CM4 status indicatorPWR: Raspberry Pi power indicatorACT: Raspberry Pi operating status indicator 4G/5G module status indicatorM.2 PWR: module enable indicatorM.2 NET: module operating status indicator PWR & USB5V DC power supply or USB programming port M.2 B KEYsupports 4G/5G modules with M.2 B KEY connector, or other communication modules using USB channel Nano-SIM card slotsupports standard Nano-SIM card for 5G/4G/3G/2G communication BOOT selectionON: CM4 will be booted from USB-C interfaceOFF: CM4 will be booted from eMMC or TF card UPS module ON/OFFON: CM4 and the base board will be powered by UPS moduleOFF: Turn off the UPS power supply to CM4 and base board DC power supply7 ~ 36V DC input Dual non-isolated RS4852x RS485, with 600W lightningproof, anti-surge, and 15KV ESD protection (reserved 120R optional balancing resistor jumper) Non-isolated CANESD protection and transient spike voltage protection (reserved 120R optional balancing resistor jumper) TF card slotfor connecting a TF card with pre-burnt image (Lite variant ONLY) FAN headerfor connecting cooling fan, allows speed adjustment and measurement CAMMIPI CSI camera port, 15Pin 1mm pitch RTC battery holdersupports CR1220 button cell M.2 VCC selectionselect 3.3V or 4.2V power supply RTC interruption configurationPI-RUN: CM4 will reboot on RTC interruptionGL-EN: CM4 power down on RTC interruptionD17: D17 pin is triggered on RTC interruption (default) IO-VREF selectionset the CM4 IO logic level as 3.3V (default) or 1.8V FAN power supply selectionselect 12V (default) or 5V power to drive the fan System function configurationBT_DIS: Bluetooth disabled, for CM4 with antenna variant ONLYWiFi_DIS: WiFi disabled, for CM4 with antenna variant ONLYWP_DIS: boot mode switch, ONLY be used when NOT booted from eMMC or SD card RTC/FAN I2C bus selectionSDA0/SCL0: I2C-10 is shared with CSI/DSI (default)GPIO3/2: I2C-1 is shared with GPIO header Partial GPIO headerincluding 1x I2C, 2x GPIO pins, and power supply UPS Module Mini header Outline Dimensions Resources WIKI: www.waveshare.com/wiki/CM4-IO-WIRELESS-BASE-B