Mini Dual Gigabit Ethernet Mini-Computer Kit for Raspberry Pi Compute Module 5

Waveshare 31073 - Mini Dual Gigabit Ethernet Base Board / Mini-Computer Kit Designed for Raspberry Pi Compute Module 5 (NOT Included), For All Variants Of CM5 Specifications CM5 socket suitable for all variants of Compute Module 5 Networking Dual Gigabit Ethernet RJ45 connectors USB USB 3.0 port PIN HEADER Raspberry Pi 40PIN GPIO header Storage TF card socket for Compute Module 5 Lite (without eMMC) variants Fan header 4-wire SH1.0 port, allows speed adjustment and measurement, 5V Power input 5V, Type-C interface Dimensions the base board: 55.0 × 68.0mm with metal case: 61.0 × 75.0 × 27.5mm Precise cut-out with clear label Eeach cut-out is completely aligned with the connector Comes with anti-slip rubber (unassembled) PSW button, for system power ON/OFF control without frequent plugging and unplugging of the power supply Antenna connector, for connecting the antenna to build a wireless router BOOT button, for setting the programming mode LED indicator for monitoring the working status of the system TF card slot, precise cut-out with clear label  Magnetic Design Adopts Magnetic removable top with location columns, easy to fix and better protection for the GPIO pins. Assembly Guide 1. Remove the bottom screws then the bottom panel. 2. Gently push the Ethernet port and take out the CM5 mini base board. 3. Paste the thermal tapes on the front and back sides of the CM5, then install the CM5 to the base board 4. Install the base board to the metal case, fix the bottom panel, then insert the TF card and power on. What's On Board 40PIN GPIO headerfor connecting sorts of HAT CM5 socketsuitable for all variants of Compute Module 5 PSW button BOOT button RTC battery headerfor connecting rechargeable RTC battery FAN headerfor connecting cooling fan, allows speed adjustment and measurement RJ45 Gigabit Ethernet portsDual RJ45 Gigabit Ethernet ports, 10/100/1000M compatibleETHERNET 0: CM5 original network portETHERNET 1: PCIe extended network port USB3.2 Gen1 Type-A portfor connecting sorts of USB devices Type-C port5V power supply, or used for eMMC programming TF card slotfor connecting a TF card with pre-burnt image (Lite variant ONLY) RTL8111HGigabit NIC chip SYSTEM switchEEPROM_WP: Prevent EEPROM from being overwrittenWiFi_DIS: WiFi disabled, only for CM5 versions with wirelessBT_DIS: Bluetooth disabled, only for CM5 versions with wireless IndicatorsRed light: indicating the power supply status of Raspberry PiGreen light: indicating the working status of Raspberry Pi Outline dimensions WIKI: www.waveshare.com/wiki/CM5-DUAL-ETH-MINI Package Content  CM5-DUAL-ETH-MINI metal case (assembled) x1 Thermal tape 5PCS x1 Black thermal tape x1 Black anti-slip rubber 4PCS x1 27W power adapter x1 Screwdriver x1